Neomul P- Primary Emulsifier for Hpht Oil-Based Mud System Drilling Fluids Additive

Product Description

Product Description

NEOMUL^® P concentrated emulsifier is the primary emulsifier in the NEODRIL^® high performance oil-based drilling fluid system. It is used conjunction with NEOMUL^® S secondary emulsifier to provide excellent emulsion stability, filtration control and thermal stability. NEOMUL^® P is activated by calcium. Lime should be added in the initial formulations.

Applications/Functions

 

• Prepares NEODRIL^® high performance oil-based drilling fluid system
• Functions as primary emulsifier and provide filtration control
• Helps maintain HPHT filtrate in a water-free state
• Improves the thermal stability and contamination resistance of oil-based mud

Advantages

• Effective at low concentrations
• Temperatures stable to >400°F
• Compatible with other oil-based and synthetic mud additives and systems

Typical Properties

• Appearance: Dark-Brown Viscous liquid
• Flash point: 176°F
• Pour point: 3°F
• Specific gravity: 0.94

Recommended Treatment

• A typical range is 4-12 ppb. The preferred ratio of NEOMUL^® P and NEOMUL^® S is 3:1 to 1:1, but a pilot test is required for optimal results
• For every pound of NEOMUL^® P that is added to the system, add 0.5 ppb of lime

Package

• 55 GAL DRUM

 

SHARK	Product Description	Applications/Functions
SHALEMUL^®  P	Primary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
SHALEMUL^® S	Secondary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
SHALEMUL^® ONE	Basic one-drum multi-purpose emulsifier up to 350°F	Conventional organically clay OBM
NEOMUL^® P	HP Primary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
NEOMUL^® S	HP Secondary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
NEOMUL^® ONE	One-drum multi-purpose emulsifier for high temperature formulation	Clay-free high performance OBM
HYPERMUL^®	One drum Emulsifier designed for extreme HT up to 450 °F	High performance OBM for application in extreme HPHT wells
REOMUL^®	Sole emulsifier designed for  flat rheology synthetic-based drilling fluid system	Builds flat rheologic profile for low-ECD technical challenge
SHALEWET^®	Wetting agent designed for shale gas drilling up to 350°F	Economical Wetting agent for OBM
NEOWET^®	High Performance Wetting Agent up to 400°F	All-purpose wetting agent for OBM
HYPERWET^®	HT Wetting Agents up to 450°F	Wetting agents with application for HT wells
^AQUAMUL®	Oil-in-water emulsifier in direct emulsion systems	Treat out salt section washout resulting brine saturation with increased mud weight