Hypermul-One Drum Emulsifier for Oil/Synthetic Based Mud System Drilling Fluid Additive

Product Description

Product Description

HYPERMUL^® one drum emulsifier is the only emulsifier in the fluids formulation designed in the HYPERDRIL^® extreme temperature non-aqueous drilling fluid system. It is used alone to provide excellent emulsion stability, preferential wetting of solids by the continuous phase, filtration control and overall system stability. It requires the addition of lime to produce a calcium soap in-situ.

Applications/Functions

• Prepares HYPERDRIL^® extreme temperature NAF system
• Impact oil-wetting characteristics and helps maintain HPHT filtrate in a water-free state

Advantages

 

• Temperatures stable to >450°F
• One-drum emulsifier, eliminating the need for separate primary and secondary emulsifiers
• Formulated to produce flatter gel strengths when compared against conventional emulsification packages
• Effective and thermally stable across a broad temperature range

Typical Properties

 

• Appearance: Transparent Amber Viscous Liquid
• Flash point: 97°C (207°F)
• Pour Point: -16°C (3°F)
• Specific gravity: 0.94

Recommended Treatment

 

• A typical range is 8-12 ppb. For every pound of HYPERMUL^® that is added to the system, add 0.5 ppb of lime
• For HPHT applications above 450°F and 16ppg, HYPERMUL^® concentrations of up to 25 ppb maybe required, and 1-3 ppb of HYPERWET^® may be required as supplementary wetting agent

Package

• 55 GAL DRUM

SHARK	Product Description	Applications/Functions
SHALEMUL^®  P	Primary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
SHALEMUL^® S	Secondary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
SHALEMUL^® ONE	Basic one-drum multi-purpose emulsifier up to 350°F	Conventional organically clay OBM
NEOMUL^® P	HP Primary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
NEOMUL^® S	HP Secondary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
NEOMUL^® ONE	One-drum multi-purpose emulsifier for high temperature formulation	Clay-free high performance OBM
HYPERMUL^®	One drum Emulsifier designed for extreme HT up to 450 °F	High performance OBM for application in extreme HPHT wells
REOMUL^®	Sole emulsifier designed for  flat rheology synthetic-based drilling fluid system	Builds flat rheologic profile for low-ECD technical challenge
SHALEWET^®	Wetting agent designed for shale gas drilling up to 350°F	Economical Wetting agent for OBM
NEOWET^®	High Performance Wetting Agent up to 400°F	All-purpose wetting agent for OBM
HYPERWET^®	HT Wetting Agents up to 450°F	Wetting agents with application for HT wells
^AQUAMUL®	Oil-in-water emulsifier in direct emulsion systems	Treat out salt section washout resulting brine saturation with increased mud weight