Sharkcmc H Technical-Grade High-Viscosity Sodium Carboxymethyl Cellulose Drilling Fluid Additive

• Customization: Available
• Appearance: off-White Powder
• Specific Gravity: 1.59
• Model NO.: DFS07-004
• pH (5% Aqueous Solution): 9-11
• Transport Package: 25 Kg Sack
• Trademark: SHARKCMC H
• Origin: China
• Production Capacity: 1000000 Mt Per Year

Product Description

Product Description

SHARKCMC^® H filtration control additive is a technical-grade high-viscosity sodium carboxymethyl cellulose used to reduce filtration in fresh water and seawater mud systems up to 250°F. It is less effective in brines and saltwater and is not generally recommended to be used if the salinity exceed 50,000 ppm. SHARKCMC^® H is used in low-viscosity or low-solids fluids and increase viscosity in addition to controlling fluid loss. Subject to bacterial degradation, a biocide should be used to prevent fermentation. SHARKCMC^® H treated systems should be pretreated with either sodium bicarbonate or possibly citric acid prior to drilling cement.

Applications/Functions

 

• Control filtration rates in freshwater and seawater mud systems
• Deflocculate some seawater muds when used in low concentrations

Advantages

 

• Temperatures stable up to 250°F
• Widely available and an economic source of polymer fluid-loss control
• Concentrated chemical, very effective at small treatment levels

Typical Properties

 

• Appearance: Off-white powder
• Specific gravity: 1.59
• pH (5% aqueous solution): 9-11

Recommended Treatment

 

• Freshwater: 0.5-1.5 ppb
• Seawater:  2-3 ppb
• Add slowly through a mixing hopper at a rate of 10-20 min/sack

Package

 

• 25 KG SACK

SHARK	Product Description	Applications/Functions
SHARKPAC® L	Low Viscous Polyanionic Cellulose	Filtration Control Agent for water based mud with minimal viscosity increase up to 300°F
SHARKPAC® R	High Viscous Polyanionic Cellulose	Filtration Control and viscosifier agent for water based mud up to 300°F
SHARKCMC® L	Low-viscosity, technical grade sodium carboxymethyl cellulose for filtration control	Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase,
SHARKCMC® H	High-viscosity, technical grade sodium carboxymethyl cellulose for filtration control and supplemental viscosity	Filtration Control and viscosifier agent for water based mud up to 250°F, salinity tolerant to 50,000ppm