Shark Oil Based Mud Emulsifier Aquamul Gai

• Customization: Available
• Appearance: Light Yellow Liquid
• Flash Point: 200°f
• Model NO.: DFS06-011
• pH: 6-8
• Specific Gravity: 1.04-1.06
• Transport Package: 55 Gal Drum
• Trademark: AQUAMUL
• Origin: China

Product Description

Product Description

AQUAMUL^® is an oil-in-water emulsifier used in direct emulsion systems. Direction emulsions are water-based muds wherein oil microdroplets (discontinuous phase) are dispersed into the brine (continuous phase). Its unique chemistry provides a high range of hydrophilic and lipophilic balance generating oil and water ratio as low as 30:70. It is specially used to treat out salt section washout resulting brine saturation with increased mud weight leading to fluid losses and disposal requirements because of direct emulsion systems combined a high concentration brine base fluid with oil.

Applications/Functions

• Oil-in-water emulsifier in direct emulsion systems.
• Stabilizes oil-in-brine emulsions using monovalent saturated brine or calcium brine
• Alternative to OBM

Advantages

• Treat out salt section washout resulting brine saturation with increased mud weight
• Minimize disposal cost
• Stable at temperature above 350°F
• Wellbore strengthening

Typical Properties

• Appearance: Light yellow liquid
• Flash point: >200°F(PMCC)
• pH (1% solution): 6-8
• Specific gravity: 1.04-1.06

Recommended Treatment

• 6-15 ppb depend on bottom hole temperature and oil brine ratio.

Package

• 55 GAL DRUM

SHARK	Product Description	Applications/Functions
SHALEMUL^®  P	Primary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
SHALEMUL^® S	Secondary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
NEOMUL^® P	HP Primary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
NEOMUL^® S	HP Secondary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
HYPERMUL^®	One drum Emulsifier designed for extreme HT up to 450 °F	High performance OBM for application in extreme HPHT wells
SHALEWET^®	Wetting agent designed for shale gas drilling up to 350°F	Economical Wetting agent for OBM
NEOWET^®	High Performance Wetting Agent up to 400°F	All-purpose wetting agent for OBM
HYPERWET^®	HT Wetting Agents up to 450°F	Wetting agents with application for HT wells