Liquid Theology Modifier Drilling Fluids

• Customization: Available
• Certification: ISO 9001
• Environmental Protection: Yes
• Model NO.: DFS14-014
• Color: White
• Appearance: Cream White, Free Flowing Powder
• Kind: Drilling Fluid
• Application: Viscosifier
• Specific Gravity: 1.15
• Transport Package: 55 Gal Drum
• Trademark: AQUAVIS L
• Origin: China
• Production Capacity: 5000 Mt/Year

Product Description

Product Description

 

AQUAVIS^® L is a liquid theology modifier designed for fresh water and high salinity monovalent brines (up to 150,000 ppm) and sea water. It's specially used in clay-free high temp water-based fluid systems and reservoir sections. The slightly crosslinked nature of this synthetic polymer provides superior performance by increasing low-end rheology, without affecting PV and YP significantly. AQUAVIS^® L comes in latex form (30 wt.% active), which allows for improved mixing and fast hydration without fish eyes. AQUAVIS^® L is stable at temperatures exceeding 400°F, and it can be used in different formation environments. Laboratory testing has also shown enhanced shale encapsulation and swelling control that complements the use of regular formation stabilizers.

Applications/Functions

 

• Provides thermo stable aqueous phase viscosity control
• Impacts thixotropy
• Prevents settling

Advantages

 

• Stable at temperature above 400°F
• Excellent rheological profile with elevated low-end readings essential for hole cleaning 
• Compatible with most drilling fluid additives

Typical Properties

 

• Appearance: white viscous liquid
• Specific gravity: 1.15

Recommended Treatment

 

• A typical range is 5-15 ppb. Pilot test and proper design procedures should be used to determine the optimal formulation

Package

 

• 55 GAL DRUM

 

Product Code	SHARK	Product Description	Applications/Functions
DFS14-011	AQUAVIS®	HT polymer viscosifier for WBM and drill-in fluid	Synthetic water-soluble polymer with higher thermal stability than xanthan gum. Can be used in water-based reservoir drill-in fluid. Higher thermal stability above 300°F
DFS14-012	AQUAVIS® HT	HPHT polymer viscosifier for WBM and drill-in fluid	Macromolecular HPHT polymer viscosifier, thermal stability above 350°F
DFS14-013	AQUAVIS® CF	HT polymeric viscosifier for HPHT drill-in WBM, white powder product	HT polymeric viscosifier for HPHT drill-in WBM exceeding 400°F
DFS14-014	AQUAVIS® L	Liquid rheology modifier for WBM	Highly effective in improving the 3 rpm and 6rpm readings of water-based drilling fluid without increasing the plastic viscosity. Applicable for clay-free and HPHT drill-in WBM exceeding 400°F
DFS14-015	KALVIS®	Viscosifier for solids-free brines and packer fluids	Performs well specially in saturated calcium-based brine with thermal stable up to 250°F, designed for drill-in fluids