Acrylic Based, Low Molecular Weight, Polymer-Type Thinner Drilling Fluids

• Customization: Available
• Certification: ISO
• Appearance: Colorless to Yellow, Viscous Liquid
• Model NO.: DFS13-003
• Specific Gravity: 1.10-1.25
• pH: 4-8
• Boiling Point: 180-212°F
• Solid Content: 45%
• Transport Package: 55 Gal Drum or 5 Gal Pail
• Trademark: COPOTHIN
• Origin: China
• Production Capacity: 5000 Mt/Year

Product Description

 

Product Description

COPOTHIN^® is an acrylic based, low molecular weight, polymer-type thinner used in most water-based drilling fluids up to 400°F It is effective thinner/deflocculant with exceptional tolerance to high temperature, divalent cautions, pH fluctuations and salinity. It will replace traditional thinners in most applications, exceeding those products in performance and cost effectiveness. COPOTHIN^® is used to maintain rheological stability in the presence of electrolyte contamination from salt, gypsum and cement. It will also aid in the prevention of high-temperature mud gelation.

Applications/Functions

• Deflocculates most water-based systems
• Helps minimize thermal flocculation
• Reduces shear strength development

Advantages

• Stable at temperature up to 400°F
• Readily soluble in water and can be added directly to agitated mud pits
• Excellent performance at low concentrations 
• Effective in the presence of salt and divalent ions
• Not pH dependent
• Environmentally acceptable

Typical Properties

• Appearance: Colorless to yellow, viscous liquid
• Specific gravity: 1.10-1.25; pH: 4-8
• Boiling Point: 180-212°F; Solid Content: 45%

Recommended Treatment

• A typical range is 1- 4 ppb, but specific drilling conditions will dictate a suitable concentration

Package

• 55 GAL DRUM or 5 GAL PAIL

SHARK	Product Description	Applications/Functions
EZTHIN®	Sulfonated Tannin	Thinner for WBM. Methyl ester of sulfonated tannin, 4-8 times more effective than chrome lignosulfonates,stable up to 400°F.
BORETHIN®	Zwitterionic polymer viscosity reducer	Used in any freshwater or brine drilling fluid systems
COPOTHIN®	Anionic acrylic copolymer	Thinner,fluid stabilizer,inhibitor and fluid-loss-reducing agent for water based fluids, stable up to 400°F.
THERMOTHIN®	Silicon-fluorine copolymer viscosity reducer for WBM	Exceptional tolerance to high temperature, divalent cautions, stable up to 450°F
AQUATHIN®	Sulfonated styrene-maleic anhydride copolymer(SSMA)	Top-level thinner with 1000-5000 molecular weight, stable above 500°F, applications in ultra-temp and ultra-deep wells.
NEOTHIN®	Petroleum sodium sulfonate  as OBM thinner	Reduce viscosity and gel strengths in OBM