HP Primary Emulsifier Designed for Long Horizontal Drilling up to 400° F Neomul P

• Customization: Available
• Appearance: Dark-Brown Viscous Liquid
• Specific Gravity: 0.94
• Model NO.: DFS06-004
• Flash Point: 176°f
• Pour Point: 3°f
• Transport Package: 55 Gal Drum
• Trademark: NEOMUL P
• Origin: China
• Production Capacity: 1000000 Mt Per Year

Product Description

Product Description

NEOMUL® P is the primary and a second-generation emulsifier used in NEODRIL® clay-free oil-based drilling fluid system and can also deliver excellent thermal stability performance exceeding 400°F. It is used conjunction with NEOMUL® S secondary emulsifier to provide excellent emulsion stability, filtration control and thermal stability. NEOMUL® P is activated by calcium. Lime should be added in the initial formulations.

Applications/Functions

• Prepares NEODRIL® high performance oil-based drilling fluid system

• Functions as primary emulsifier and provide filtration control

• Helps maintain HPHT filtrate in a water-free state

• Improves the thermal stability and contamination resistance of oil-based mud
 

Advantages

• Effective at low concentrations

• Stable at temperature above 400°F

• Compatible with other oil-based and synthetic mud additives and systems
 

Typical Properties

• Appearance: Dark-Brown Viscous liquid

• Flash point: 176°F

• Pour point: 3°F

• Specific gravity: 0.94
 

Recommended Treatment

• A typical range is 4-12 ppb. The preferred ratio of NEOMUL® P and NEOMUL® S is 3:1 to 2:1, but a pilot test is required for optimal results

• For every pound of NEOMUL® P that is added to the system, add 0.5 ppb of lime
 

Package

• 55 GAL DRUM

Product Code	SHARK	Product Description	Applications/Functions
DFS06-01	SHALEMUL®  P	Primary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
DFS06-02	SHALEMUL® S	Secondary Emulsifier designed for shale gas drilling up to 350°F	Conventional organically clay OBM
DFS06-03	SHALEMUL® ONE	Basic one-drum multi-purpose emulsifier up to 350°F	Conventional organically clay OBM
DFS06-04	NEOMUL® P	HP Primary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
DFS06-05	NEOMUL® S	HP Secondary Emulsifier designed for long horizontal drilling up to 400°F	Clay-free high performance OBM
DFS06-06	NEOMUL® ONE	One-drum multi-purpose emulsifier for high temperature formulation	Clay-free high performance OBM
DFS06-07	HYPERMUL®	One drum Emulsifier designed for extreme HT up to 500 °F	High performance OBM for application in extreme HPHT wells
DFS06-11	AQUAMUL®	Oil-in-water emulsifier in direct emulsion systems	Treat out salt section washout resulting brine saturation with increased mud weight